Nanoflex Class 0
NANOFLEX CLASS 0 is NBR based closed cell insulation specially formulated to meet England fire standard BS. Products have low flame spread following BS 476 Part 7 is Class 0 and low fire propagation following BS476 Part 6
Product details
|
Properties |
NANOFLEX Value/Assessment |
Test method/Standard |
Lab Center |
|
General |
|
|
|
|
Material |
NBR/PVC |
|
ITT- VietNam |
|
Basic Color |
Black |
For other colors, please contact with technical department |
ITT- VietNam |
|
Cell structure |
Complete closed cell |
ASTM E986 |
ITT- VietNam |
|
Density (kg/m3) |
70->100 kg/m3 |
ASTM D297 |
ITT- VietNam |
|
Service temperature |
|
|
|
|
Min service temperature |
-50°C |
ASTM E1131 |
ITT- VietNam |
|
Max service temperature |
+110°C |
ASTM E1131 |
ITT- VietNam |
|
Thermal conductivity |
|
|
|
|
K-value (W/m.K) |
0°C 24°C 40°C 0.034 0.037 0.039 |
ASTM C 177 ASTM C 518 |
VNIIC- VietNam IBST – VietNam |
|
Water vapors behavior |
|
|
|
|
water vapor permeability coefficient (Kg/Pa.s.m) |
0.16 x 10^-12 kg/Pa.s.m |
ASTM E96 |
VNIIC- VietNam
|
|
Moisture resistance (µ value) |
µ ≥7000 (15000) |
DIN 52615 |
VNIIC- VietNam
|
|
Water Absorption (by volume) |
≤0.12 % |
ASTM D471 |
ITT- VietNam |
|
Flammability & Smoke |
|
|
|
|
Fire performance & Smoke |
Class 0 |
BS476 Part 6 |
EXOVA- England |
|
|
|
|
|
|
Strength Physics |
|
|
|
|
Dimension stability (%) at 105±3°C in 7 days |
5.4% |
ASTM D1204 |
ITT- VietNam Quatest 3- Vietnam |
|
Compression resilience ratio (Compression 50%, 72 hrs) |
72.5% |
ASTM D395 |
ITT- VietNam |
|
Environment |
|
|
|
|
UV & Weather resistance |
No crack |
ASTM G154 |
ITT- VietNam |
|
Fungi Resistance |
95% |
ISO 21527 |
ITT- VietNam |
|
Mold resistance |
95% |
ASTM G21/ISO 21527 |
ITT- VietNam |
|
Other technical data |
|
|
|
|
The volume change in oil (7 days – 168 hrs) |
3.52% |
ASTMD471 |
ITT- VietNam |
|
Breakdown voltage KV |
35 kV |
ASTM D419 |
ITT- VietNam |
|
Insulation resistance |
7.49*10^9 Ω |
TVCN 10232 |
ITT- VietNam |
| Tube Length: 1.83m |
|
| Thickness | Diametter |
| 10 – 13 – 19 – 25 – 32 – 38 mm | 6 mm – 140 mm |
| Tube Roll : 45m – 90m – 180m |
|
| Thickness | Diametter |
| 10 – 13 mm | 6 – 10 – 13 mm |
| Sheet Width : 1m – 1.1m – 1.2m – 1.4m |
|
| Thickness | |
| 6 – 10 – 13 – 16 – 19 – 25 – 32 – 38 – 50 mm | 6 – 10 – 13 – 16 – 19 – 25 – 32 – 38 – 50 mm |
Packege –
| Thickness (mm) |
Length (m) |
(m2) / roll | ||
| W1000mm | W1200mm | W1400mm | ||
| 6 | 10 | 10 | 12 | 14 |
| 10 | 10 | 10 | 12 | 14 |
| 13 | 10 | 10 | 12 | 14 |
| 16 | 10 | 10 | 12 | 14 |
| 19 | 10 | 10 | 12 | 14 |
| 25 | 10 | 10 | 12 | 14 |
Package – Tube
| Diametter | Số lượng: sợi/thùng | ||||
| MM | INCH |
10 mm wall |
13 mm wall |
19 mm wall |
25 mm wall |
| 6 | 1/4” | 144 | 90 | 42 | 32 |
| 10 | 3/8” | 120 | 80 | 42 | 25 |
| 13 | 1/2” | 100 | 70 | 36 | 20 |
| 16 | 5/8” | 84 | 63 | 34 | 20 |
| 19 | 3/4” | 68 | 56 | 30 | 20 |
| 22 | 7/8” | 66 | 45 | 30 | 18 |
| 25 | 1” | 50 | 40 | 25 | 18 |
| 28 | 1-1/8” | 50 | 36 | 24 | 16 |
| 32 | 1-1/4” | 42 | 32 | 18 | 15 |
| 35 | 1-3/8” | 38 | 29 | 18 | 15 |
| 38 | 1-1/2” | 36 | 27 | 18 | 15 |
| 42 | 1-5/8” | 30 | 24 | 15 | 12 |
| 48 | 1-7/8” | 25 | 20 | 16 | 12 |
| 51 | 2” | 24 | 20 | 13 | 9 |
| 54 | 2-1/8” | 20 | 18 | 13 | 9 |
| 60 | 2-3/8” | 26 | 18 | 12 | 9 |
| 64 | 2-1/2” | 20 | 18 | 12 | 9 |
| 67 | 2-5/8” | * | 18 | 11 | 9 |
| 76 | 3” | * | 16 | 9 | 8 |
| 89 | 3.-1/2” | * | * | 8 | 7 |
| 108 | 4-1/4” | * | * | 8 | 6 |
| 114 | 4-1/2” | * | * | 7 | 5 |
| 140 | 5-1/2” | * | * | 6 | 4 |
| 165 | 6-1/2” | * | * | 3 | 3 |
| 168 | 6-5/8” | * | * | 3 | 3 |
Related products
TUBE INSULATION WITH ALUMINIUM CLASS2
NANOFLEX TUBE INSULATION WITH ALUMINIUM CLASS2 with aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance.In particular for outdoors application, it has good anti-aging properties and is resistant to all weather conditions.. The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
SHEET INSULATION WITH ADHESIVE LAYER CLASS2
NANOFLEX insulation with adhesive layer structure is the bottom surface is glued with a layer of glue + silicone release paper, the remaining surface is black. The adhesive layer is easy to construct and very sticky on surfaces such as steel, plastic, metal & non-metal, etc. There is a special type of glue that does not die specifically for ventilation pipes, cooling water pipes, hot water pipes. High economic efficiency when used under normal conditions in construction works and factories.The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
SHEET INSULATION ALL IN ONE ( ONE ALUMINIUM & ONE ADHESIVE LAYER) CLASS2
NANOFLEX SHEET NORMAL INSULATION CLASS2 set of features in one complete product, with an enhanced 9µm thick aluminum shell and a pre-coated adhesive layer on the bottom for precise, quick and easy installation. The aluminum film on the surface can withstand temperatures up to 200 degrees Celsius, creating a perfect outer protective layer, improving resistance to UV rays, ozone, dirt and enhancing aesthetics.. The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
SHEET INSULATION WITH ALUMINIUM LAYER CLASS2
NANOFLEX SHEET INSULATION WITH ALUMINIUM CLASS2 with aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance. The foil facings ensure almost zero vapor permeability.In particular for outdoors application, it has good anti-aging properties and is resistant to all weather conditions. The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
TUBE INSULATION PRE -CUTTING
Pipeline insulation of this type is pre-cut throughout half the length of the pipe. This pipe makes construction convenient, saving labor costs in special cases.Suitable for active pipelines requiring quick installation. Especially require high art and avoid opening joints after being properly protected.
SHEET NORMAL INSULATION CLASS 2
NANOFLEX SHEET NORMAL INSULATION CLASS 2 is a high standard with surface all is black, product which is popularly used in refrigerant industry in purpose of prevent condensation problem on chiller water and refrigeration systems and saving energy. The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
Nanoflex Standard STD
NANOFLEX STD is a high standard with surface all is black, product which is popularly used in refrigerant industry in purpose of prevent condensation problem on chiller water and refrigeration systems and saving energy. The product have low and stable thermal conductivity K-value, high water vapor permeability µ value and meet ASTM D635 class HB, UL94 Class V0.
