Nanoflex NG01 Adhesiver
Nanoflex NG01(Black): Specialized glue for gluing vulcanized rubber-based insulation materials (NBR / EPDM, PE, EVA, foam, air ducts, sofas, cushions.)
Product details
Characteristic:
– High solid content, strong adhesion, high temperature resistance,anti-oxidation, anti-oil, environmental protection, saving glue.
Applicatiion:
– Used to stick NBR, EPDM, PE, EVA foam, fabric, plastic, leather, foam, carpet, garment, suitcase, foam felt, decorative furniture…
User manual:
– Step 1: Shake the glue well before use and make sure the bonding surface is dry and clean
– Step 2: Using a paint brush or paint roller, apply a thin layer of glue evenly on both surfaces to be bonded
– Step 3: Let the glue dry naturally, the natural drying time of the coating surface usually takes 2-10 minutes, depending on the temperature and humidity of the surrounding environment.
– Step 4: After bonding the 2 surfaces together, apply light pressure and hold a little on the bonding surface.
– Note: The construction area needs ventilation, do not close the door.
Standard
– GB18583-2008 /H2541-2016/GB33372-2020
Typical:
-SBS GLUE
Note :
– Store the product in a ventilated place, away from fire
– Store at a temperature of 10 -25℃, keep out of reach of children
– Rinse immediately with water and see a doctor after the glue gets into the eyes.
Packaging :
-Net weight : 08kg/box
– Box, box cover: yellow-green, dark green.
Related products
ADHESIVE FOR CAR INTERIORS NG05
Synthetic rubber-based glue, high viscosity, heat resistant, odorless after curing.
Nanoflex NG03 Adhesiver
Nanoflex NG03 (Black and yellow glue) Thick viscous form, long drying time, low odor, environmentally friendly, glue-saving.
Nanoflex NG02 Adhesiver
Nanoflex NG02 (Black, yellow glue): Specialized glue used to glue chiller pipes Special glue for gluing curved surfaces (all kinds of pipes, chiller pipes). Specially used for vulcanized rubber insulation materials (NBR / EPDM, PE, EVA, foam, air ducts, sofas, mattresses), floor mats,...
