SHEET INSULATION WITH GLUE LAYER CLASS0
NANOFLEX insulation with adhesive layer structure is that the lower surface is glued by a layer of glue + silicone release paper, the other surface is black. The adhesive layer is easy to apply and very sticky to adhere to surfaces such as steel, plastic, metal & non-metal etc. There is a special non-dead glue that is used for ventilation pipes, cooling water pipes, hot water pipes. High economic efficiency when used under normal conditions in constructions and factories.
Product details
| Properties |
NANOFLEX Value/Assessment |
Test Method |
Lab Center |
|
General |
|
|
|
|
Material |
NBR/PVC |
|
ITT- VietNam |
|
Color |
Black |
For the colors, Please contact with technical department |
ITT- VietNam |
|
Cell Structure |
Complete close cell |
ASTM E986 |
ITT- VietNam |
|
Density (kg/m3) |
50->100 kg/m3 |
ASTM D297 |
ITT- VietNam |
|
Service Temperature |
|
|
|
|
Min service temperature |
-50°C |
ASTM E1131 |
ITT- VietNam |
|
Max service temperature |
+110°C |
ASTM E1131 |
ITT- VietNam |
|
Thermal conductivity |
|
|
|
|
K-value (W/m.K) |
0°C 23°C 40°C 0.032 0.0343 0.039 |
ASTM C 518 |
VIBM – VIET NAM |
|
Water vapors behavior |
|
|
|
|
Water vapor permeability coefficient (Kg/Pa.s.m) |
0.57 x 10^-13 kg/Pa.s.m |
ASTM E96 |
VIBM – VIET NAM
|
|
Water Absorption (by volume) |
≤ 0.47% (%volume) ≤ 5.28% (%volume) |
ASTM C1104 |
VIBM – VIET NAM
|
|
Flammability & Smoke |
|
|
|
|
Fire performance & smoke |
Class V) – No Flaming droplet when buring Class HB 4 – Zero (0-0-0-0) Class 0 |
UL 94 ASTM D635 -18 ISO 11925-2 BS 476 Part 6 |
SGS – Shanghai SGS – Shanghai VIBM – Vietnam SGS – Shanghai
|
|
Strength physics |
|
|
|
|
Dimension stability % Compression resilience ratio Tensile strength (Mpa) Adhesion glue layer with Metal surface |
9.58% at 105 ± 3℃ in 7 days 75,6% ( Compression) 0,62 Mpa 0.24N/mm |
ASTM D1204 ASTM D395 ASTM D412 ASTM D429 |
ITT – VietNam ITT – VietNam ITT – VietNam ITT – VietNam
|
|
Environment & Health |
|
|
|
|
UV & Weather resistance |
No crack |
ASTM G154 |
ITT- VietNam |
|
Fungi Resistance |
95% |
ISO 21527 |
ITT- VietNam |
| Mold resistance |
95% |
ASTM G21/ISO 21527 |
ITT- VietNam |
|
Other technical data |
|
|
|
|
The volume change in oil (7 days – 168 hrs) |
3.52% |
ASTMD471 |
ITT- VietNam |
|
Breakdown voltage KV |
35 kV |
ASTM D419 |
ITT- VietNam |
|
Insulation resistance |
7.49*10^9 Ω |
TVCN 10232 |
ITT- VietNam |
SHEET INSULATION WITH ALUMINIUM LAYER (F2)
NANOFLEX sheet (F2) with aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance. The foil facings ensure almost zero vapor permeability.In particular for outdoors application, it has good anti-aging properties and is resistant to all weather conditions.
-NANOFLEX insulation with adhesive layer structure is the bottom surface is glued with a layer of glue + silicone release paper, the remaining surface is black.
-The adhesive layer is easy to construct and very sticky on surfaces such as steel, plastic, metal & non-metal, etc.
-There is a special type of glue that does not die, specifically used for ventilation pipes, cooling water pipes, hot water pipes.
-High economic efficiency when used under normal conditions in construction works and factories.
 |
 |
 |
Related products
TUBE INSULATION COLOR RUBBER
NANOFLEX TUBE INSULATION COLOR RUBBER is cylindrical tube has closed cell structure with a core inside diameter was installed that fits with system air conditioning copper pipes, metal pipes water cooling, hot water PPR pipe, condensate uPVC pipe and soundproof decorative pipe is packed in carton box very handy…our insulation are widely used to saving energy, control and prevent condensation problem on chiller water pipe and refrigeration pipe. They also efficiently reduce heat flow on the hot water plumbing, liquid heating and soundproof application.. Especially require high art and avoid opening joints after being properly protected.
TUBE INSULATION WITH ALUMINIUM CLASS0
NANOFLEX tube (T2) with aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance.
In particular for outdoors application, it has good anti-aging properties and is resistant to all weather conditions.
We are offering 4 grades of aluminum for multi-purpose applications.
TUBE INSULATION WITH FABRICS JACKET CLASS0
Insulation jacketing consists of an outelnsulation jacketingr covering that is wrapped around tubing or pipe insulation to protect the insulation from moisture, wear and mechanical damage. The jacket also serves to provide support for the insulation and establish the system emissivity and appearance. Insulation jacketing plays an important role in the efficiency of the insulation.
The type of jacketing used depends on the mechanical, chemical, thermal, and moisture conditions of the installation as well as cost and aesthetics requirements.
TUBE NORMAL INSULATION CLASS0
NANOFLEX normal tube (T1) is cylindrical tube has closed cell structure with a core inside diameter was installed that fits with system air conditioning copper pipes, metal pipes water cooling, hot water PPR pipe, condensate uPVC pipe and soundproof decorative pipe is packed in carton box very handy…our insulation are widely used to saving energy, control and prevent condensation problem on chiller water pipe and refrigeration pipe. They also efficiently reduce heat flow on the hot water plumbing, liquid heating and soundproof application.
SHEET INSULATION ALL IN ONE ( ONE ALUMINIUM & ONE ADHESIVE LAYER) CLASS0
The aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance. The outer sides of the leaves ensure near-zero water vapor permeability.Adhesive layer with peel off paper for easy application and excellent adhesion to surfaces such as steel, plastic, metal & non- metal, etc. There is a special glue that does not die specifically for ventilation pipes, cooling water pipes, hot water pipes. High economic efficiency when used in indoor and outdoor conditions in buildings and factories.
SHEET INSULATION WITH ALUMINIUM LAYER CLASS0
NANOFLEX sheet (F2) with aluminum layer is highly puncture and tear resistant. Contains flame retardants and can be used as the exterior of hot or cold insulation. This product also provides excellent vapor barrier performance. The foil facings ensure almost zero vapor permeability.In particular for outdoors application, it has good anti-aging properties and is resistant to all weather conditions.
SHEET NORMAL INSULATION CLASS0
NANOFLEX standard sheet (F1) is a textured sheet with no binder and no aluminum layer, standard color for two surfaces is black. Installation for ventilation duct systems, cooling water and hot water pipes. High economic efficiency when used in normal conditions in buildings and factories.
