Nanoflex NG02 Adhesiver

Nanoflex NG02 (Black, yellow glue): Specialized glue used to glue chiller pipes Special glue for gluing curved surfaces (all kinds of pipes, chiller pipes). Specially used for vulcanized rubber insulation materials (NBR / EPDM, PE, EVA, foam, air ducts, sofas, mattresses), floor mats,...

Product details

Characteristic:

– High solid content, strong adhesion, high temperature resistance,anti-oxidation, anti-oil, environmental protection, saving glue.

Application:

– Used to stick NBR/ EPDM/ PE/EVA foam, fabric, plastic, leather, foam, carpet, garment, suitcase, foam felt, decorative furniture…

User manual:

Step 1: Shake the glue well before use

Step 2: Clean the construction surface

Step 3: Use a paint brush or paint roller to apply a thin layer of glue evenly on both surfaces to be bonded

Step 4: Let the glue dry naturally, the natural drying time of the coating surface usually takes 2-10 minutes, depending on the temperature and humidity of the surrounding environment.

Step 5: After bonding the 2 surfaces together, apply light pressure and hold a little on the bonding surface.

Note: The construction area must be ventilated, do not close the door, and do not use fire

Standard : – GB18583-2008 /H2541-2016/GB33372-2020

Typical: CR GLUE

Note :

– Store the product in a ventilated place, away from fire

– Store at a temperature of 10 -25℃, keep out of reach of children

– Rinse immediately with water and see a doctor after the glue gets into the eyes.