SHEET INSULATION WITH ADHESIVE LAYER CLASS1
NANOFLEX insulation with adhesive layer structure is the bottom surface is glued with a layer of glue + silicone release paper, the remaining surface is black. The adhesive layer is easy to construct and very sticky on surfaces such as steel, plastic, metal & non-metal, etc. There is a special type of glue that does not die specifically for ventilation pipes, cooling water pipes, hot water pipes. High economic efficiency when used under normal conditions in construction works and factories.
Product details
|
Properties |
NANOFLEX Value/Assessment |
Test method/Standard |
Lab Center |
|
General |
|
|
|
|
Material |
NBR/PVC |
|
ITT- VietNam |
|
Basic Color |
Black |
For other colors, please contact with technical department |
ITT- VietNam |
|
Cell structure |
Complete closed cell |
ASTM E986 |
ITT- VietNam |
|
Density (kg/m3) |
70->100 kg/m3 |
ASTM D297 |
ITT- VietNam |
|
Service temperature |
|
|
|
|
Min service temperature |
-50°C |
ASTM E1131 |
ITT- VietNam |
|
Max service temperature |
+110°C |
ASTM E1131 |
ITT- VietNam |
|
Thermal conductivity |
|
|
|
|
K-value (W/m.K) |
0°C 24°C 40°C 0.034 0.037 0.039 |
ASTM C 177 ASTM C 518 |
VNIIC- VietNam IBST – VietNam |
|
Water vapors behavior |
|
|
|
|
water vapor permeability coefficient (Kg/Pa.s.m) |
0.16 x 10^-12 kg/Pa.s.m |
ASTM E96 |
VNIIC- VietNam
|
|
Moisture resistance (µ value) |
µ ≥7000 (15000) |
DIN 52615 |
VNIIC- VietNam
|
|
Water Absorption (by volume) |
≤0.12 % |
ASTM D471 |
ITT- VietNam |
|
Flammability & Smoke |
|
|
|
|
Fire performance & Smoke |
Class 0 |
BS476 Part 6 |
EXOVA- England |
|
|
|
|
|
|
Strength Physics |
|
|
|
|
Dimension stability (%) at 105±3°C in 7 days |
5.4% |
ASTM D1204 |
ITT- VietNam Quatest 3- Vietnam |
|
Compression resilience ratio (Compression 50%, 72 hrs) |
72.5% |
ASTM D395 |
ITT- VietNam |
|
Environment |
|
|
|
|
UV & Weather resistance |
No crack |
ASTM G154 |
ITT- VietNam |
|
Fungi Resistance |
95% |
ISO 21527 |
ITT- VietNam |
|
Mold resistance |
95% |
ASTM G21/ISO 21527 |
ITT- VietNam |
|
Other technical data |
|
|
|
|
The volume change in oil (7 days – 168 hrs) |
3.52% |
ASTMD471 |
ITT- VietNam |
|
Breakdown voltage KV |
35 kV |
ASTM D419 |
ITT- VietNam |
|
Insulation resistance |
7.49*10^9 Ω |
TVCN 10232 |
ITT- VietNam |
NANOFLEX insulation with adhesive layer structure is the bottom surface is glued with a layer of glue + silicone release paper, the remaining surface is black.
The adhesive layer is easy to construct and very sticky on surfaces such as steel, plastic, metal & non-metal, etc.
There is a special type of glue that does not die, specifically used for ventilation pipes, cooling water pipes, hot water pipes.
High economic efficiency when used under normal conditions in construction works and factories.
 |
 |
 |
|
Thickness (mm) |
Lengh (m) |
Area /Roll (m2) |
||
|
1.1m Width |
1.2m Width |
1.4m Width |
||
|
6 |
10 |
S-W1100x6T (11.0) |
S-W1200x6T(12.0) |
S-W1400x6T (14.0) |
|
10 |
10 |
S-W1100x10T (11.0) |
S-W1200x10T (12.0) |
S-W1400x10T (14.0) |
|
13 |
10 |
S-W1100x13T (11.0) |
S-W1200x13T (12.0) |
S-W1400x13T (14.0) |
|
15 |
10 |
S-W1100x15T (11.0) |
S-W1200x15T (12.0) |
S-W1400x15T (14.0) |
|
19 |
10 |
S-W1100x19T (11.0) |
S-W1200x19T (12.0) |
S-W1400x19T (14.0) |
|
25 |
10 |
S-W1100x25T (11.0) |
S-W1200x25T (12.0) |
S-W1400x25T (14.0) |
|
32 |
10 |
S-W1100x32T (11.0) |
S-W1200x32T (12.0) |
S-W1400x32T (14.0) |
|
38 |
10 |
S-W1100x38T (11.0) |
S-W1200x38T (12.0) |
S-W1400x38T (14.0) |
|
50 |
10 |
S-W1100x50T (11.0) |
S-W1200x50T (12.0) |
S-W1400x50T (14.0) |
Related products
TUBE NORMAL INSULATION WITH ALUMINIUM PRE CUTTING CLASS1
Nanoflex Insulation Class 1 silver sleeve is manufactured from the world's most modern technology line, the product has a completely closed foam structure, low thermal conductivity, and vapor resistance. great fire and water. There are two types of products - tubes and plates. It is easy to install, safe and environmental protection. The insulation material is suitable for water and gas pipes in HVAC systems, cooling and heating equipment, hot water pipes, to ensure the tightness of the whole system. Pipeline insulation of this type is pre-cut throughout half the length of the pipe. This pipe makes construction convenient, saving labor costs in special cases
SHEET INSULATION ALL IN ONE ( ONE ALUMINIUM & ONE ADHESIVE LAYER) CLASS 1
A set of features in one complete product, with an enhanced 9µm thick aluminum shell and a pre-coated adhesive layer on the bottom for precise, quick and easy installation. The aluminum film on the surface can withstand temperatures up to 200 degrees Celsius, creating a perfect outer protective layer, improving resistance to UV rays, ozone, dirt and enhancing aesthetics.
SHEET INSULATION WITH ALUMINIUM LAYER CLASS1
SHEET INSULATION WITH ALUMINIUM LAYER CLASS 1 is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6.
SHEET NORMAL INSULATION CLASS1
SHEET NORMAL INSULATION CLASS 1 is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6. is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6.
TUBE NORMAL INSULATION CLASS1
Nanoflex is a standard product commonly used in the HVAC industry, providing excellent insulation efficiency to help save energy. With a low and stable thermal conductivity coefficient (K-value), low water vapor permeability coefficient, meeting Class V-0 fire resistance standards (UL 94 of the US) and Class 1 (BS476 part 7 of the UK), this is the optimal choice for customers.
Tube insulation with Aluminium Class 1
Nanoflex Insulation Class 1 silver sleeve is manufactured from the world's most modern technology line, the product has a completely closed foam structure, low thermal conductivity, and vapor resistance. great fire and water. There are two types of products - tubes and plates. It is easy to install, safe and environmental protection. The insulation material is suitable for water and gas pipes in HVAC systems, cooling and heating equipment, hot water pipes, to ensure the tightness of the whole system.
TUBE INSULATION WITH FABRICS JACKET CLASS1
NANOFLEX TUBE INSULATION WITH FABRICS JACKET CLASS 1 is NBR based closed cell insulation specially formulated to meet England fire standard BS. Products have low flame spread following BS 476 Part 7 is Class 1 and low fire propagation following BS476 Part 6.
