TUBE INSULATION WITH FABRICS JACKET CLASS1

NANOFLEX TUBE INSULATION WITH FABRICS JACKET CLASS 1 is NBR based closed cell insulation specially formulated to meet England fire standard BS. Products have low flame spread following BS 476 Part 7 is Class 1 and low fire propagation following BS476 Part 6.

Product details

Properties	NANOFLEX Value/Assessment	Test method/Standard	Lab Center
General
Material	NBR/PVC		ITT- VietNam
Basic Color	Black	For other colors, please contact with technical department	ITT- VietNam
Cell structure	Complete closed cell	ASTM E986	ITT- VietNam
Density (kg/m3)	50 ->80 kg/m3	ASTM D297	ITT- VietNam
Service temperature
Min service temperature	-50°C	ASTM E1131	ITT- VietNam
Max service temperature	+110°C	ASTM E1131	ITT- VietNam
Thermal conductivity
K-value (W/m.K)	0°C 24°C 40°C 0.034 0.037 0.039	ASTM C 177 ASTM C 518	VNIIC- VietNam IBST – VietNam
Water vapors behavior
water vapor permeability coefficient (Kg/Pa.s.m)	0.16 x 10^-12 kg/Pa.s.m	ASTM E96	VNIIC- VietNam
Moisture resistance (µ value)	µ ≥7000 (15000)	DIN 52615	VNIIC- VietNam
Water Absorption (by volume)	≤0.12 %	ASTM D471	ITT- VietNam
Flammability & Smoke
Fire performance & Smoke	Class 1	BS476 Part 7	EXOVA- England

Strength Physics
Dimension stability (%) at 105±3°C in 7 days	5.4%	ASTM D1204	ITT- VietNam Quatest 3- Vietnam
Compression resilience ratio (Compression 50%, 72 hrs)	72.5%	ASTM D395	ITT- VietNam
Environment
UV & Weather resistance	No crack	ASTM G154	ITT- VietNam
Fungi Resistance	95%	ISO 21527	ITT- VietNam
Mold resistance	95%	ASTM G21/ISO 21527	ITT- VietNam
Other technical data
The volume change in oil (7 days – 168 hrs)	3.52%	ASTMD471	ITT- VietNam
Breakdown voltage KV	35 kV	ASTM D419	ITT- VietNam
Insulation resistance	7.49*10^9 Ω	TVCN 10232	ITT- VietNam

Tube Length: 1.83m
Thickness	Diametter
10 – 13 – 19 – 25 – 32 – 38 mm	6 mm – 140 mm
Tube Roll : 45m – 90m – 180m
Thickness	Diametter
10 – 13 mm	6 – 10 – 13 mm
Sheet Width : 1m – 1.1m – 1.2m – 1.4m
Thickness
6 – 10 – 13 – 16 – 19 – 25 – 32 – 38 – 50 mm	6 – 10 – 13 – 16 – 19 – 25 – 32 – 38 – 50 mm

Package – Roll

Thickness (mm)	Length (m)	(m²) / roll
Thickness (mm)	Length (m)	W1000mm	W1200mm	W1400mm
6	10	10	12	14
10	10	10	12	14
13	10	10	12	14
16	10	10	12	14
19	10	10	12	14
25	10	10	12	14

Package – Tube

Diametter		Số lượng: sợi/thùng
MM	INCH	10 mm wall	13 mm wall	19 mm wall	25 mm wall
6	1/4”	144	90	42	32
10	3/8”	120	80	42	25
13	1/2”	100	70	36	20
16	5/8”	84	63	34	20
19	3/4”	68	56	30	20
22	7/8”	66	45	30	18
25	1”	50	40	25	18
28	1-1/8”	50	36	24	16
32	1-1/4”	42	32	18	15
35	1-3/8”	38	29	18	15
38	1-1/2”	36	27	18	15
42	1-5/8”	30	24	15	12
48	1-7/8”	25	20	16	12
51	2”	24	20	13	9
54	2-1/8”	20	18	13	9
60	2-3/8”	26	18	12	9
64	2-1/2”	20	18	12	9
67	2-5/8”	*	18	11	9
76	3”	*	16	9	8
89	3.-1/2”	*	*	8	7
108	4-1/4”	*	*	8	6
114	4-1/2”	*	*	7	5
140	5-1/2”	*	*	6	4
165	6-1/2”	*	*	3	3
168	6-5/8”	*	*	3	3

Related products

TUBE NORMAL INSULATION WITH ALUMINIUM PRE CUTTING CLASS1

Nanoflex Insulation Class 1 silver sleeve is manufactured from the world's most modern technology line, the product has a completely closed foam structure, low thermal conductivity, and vapor resistance. great fire and water. There are two types of products - tubes and plates. It is easy to install, safe and environmental protection. The insulation material is suitable for water and gas pipes in HVAC systems, cooling and heating equipment, hot water pipes, to ensure the tightness of the whole system. Pipeline insulation of this type is pre-cut throughout half the length of the pipe. This pipe makes construction convenient, saving labor costs in special cases

Detail

SHEET INSULATION WITH ADHESIVE LAYER CLASS1

NANOFLEX insulation with adhesive layer structure is the bottom surface is glued with a layer of glue + silicone release paper, the remaining surface is black. The adhesive layer is easy to construct and very sticky on surfaces such as steel, plastic, metal & non-metal, etc. There is a special type of glue that does not die specifically for ventilation pipes, cooling water pipes, hot water pipes. High economic efficiency when used under normal conditions in construction works and factories.

Detail

SHEET INSULATION ALL IN ONE ( ONE ALUMINIUM & ONE ADHESIVE LAYER) CLASS 1

A set of features in one complete product, with an enhanced 9µm thick aluminum shell and a pre-coated adhesive layer on the bottom for precise, quick and easy installation. The aluminum film on the surface can withstand temperatures up to 200 degrees Celsius, creating a perfect outer protective layer, improving resistance to UV rays, ozone, dirt and enhancing aesthetics.

Detail

SHEET INSULATION WITH ALUMINIUM LAYER CLASS1

SHEET INSULATION WITH ALUMINIUM LAYER CLASS 1 is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6.

Detail

SHEET NORMAL INSULATION CLASS1

SHEET NORMAL INSULATION CLASS 1 is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6. is a closed cell NBR based insulation material specially formulated to meet the British Fire Retardant Standard BS. The product has a low flame spread to BS 476 Part 7 Class 0 and a low flame spread to BS476 Part 6.

Detail

TUBE NORMAL INSULATION CLASS1

Nanoflex is a standard product commonly used in the HVAC industry, providing excellent insulation efficiency to help save energy. With a low and stable thermal conductivity coefficient (K-value), low water vapor permeability coefficient, meeting Class V-0 fire resistance standards (UL 94 of the US) and Class 1 (BS476 part 7 of the UK), this is the optimal choice for customers.

Detail